Air Suspension
ID #1096
Question;
Air spring will not hold air
Answer:
Normal pressure loss is no more
than 0.3 bar per week when the air spring is inflated to 3.5
bar.
Using the inflation valve cap as a core tool, ensure that the valve core is installed securely.
Apply a solution of soap and water to the air fittings, air line, and air springs to check for leaks. Tighten the air fittings, air line and air springs to check for leaks. Tighten the air fitting or reinstall the tubing in the air fitting to stop the leak. Rinse the soap and water solution from the system when complete.
Using the inflation valve cap as a core tool, ensure that the valve core is installed securely.
Apply a solution of soap and water to the air fittings, air line, and air springs to check for leaks. Tighten the air fittings, air line and air springs to check for leaks. Tighten the air fitting or reinstall the tubing in the air fitting to stop the leak. Rinse the soap and water solution from the system when complete.
Related entries:
- Can I have different air pressures in each air spring?
- What's an air spring?
- We are very interested in purchasing a left hand seat swivel for our iveco daily 35 S 14 HPT 2006 autocruise Pinto motor caravan but would like advice as to would the swivels you provide be suitable for the seats fitted to our van. They are the Isringhausen type seats similar to the seats fitted in lorries that spring up and down to smooth out the ride as you travel over poor road surfaces. Hope you can help us with this as we realy would like to fit a swivel.
- The door lock into the living quarters of my Fiat Ducatto Bessacarr E695 (V reg 2000) motorhome is broken. I think I only need the barrel of the lock which I think is a Zadi, although I am no expert
- i would like to acquire a number of items, can you possibly call me to tell me if you have these items in stock and when they could possibly be delivered as i am on a dead line to leave for france in three weeks look forward to hearing from you
{translationForm}