| |
The PneurideŽ range of semi air suspension systems are made by Dunlop Systems and Components. Air suspension system and bellows have been well put together, developed and manufactured by this company for about than half a century. During this time exceeding than 10 million parts have been sent to a very wide range of vehicle fabricators.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should hopefully be well within the scope of a confident 'do it yourself' person. The total number of parts has been minimised and no special tools are needed.
Semi air suspension accessories enable the vehicle ride height to be set level. They greatly boost stability, in particular during high-momentum motorway travel - in a straight-line, when buffeted by strong cross winds and whilst being overtaken by heavy vehicles. At lower speeds Pneuride assistors fundamently fundamentally abate camper van lean on roundabouts and even when cornering.
A rear suspension fitted with a semi air suspension arrangement can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Many firm fit semi air suspension units to make good the rear ride height of a motorhome to its original level. Unlike vans, motorhomes are always fully laden. This is especially true if additional rear racks are fitted to carry bikes etc. As a consiquence of of endless copious loading, steel cushion inclined to sag after a bit. Semi air suspension units effectively counter this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |