| |
The PneurideŽ class of semi air suspension systems are supplied by Dunlop Systems and Components. Air bellows and bellows have been designed, designed and manufactured by this company for more than half a century. During this time more than 10 million parts have been sent out to a very wide range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way any fitting should be well within the scope of a confident 'do it yourself' person. The total number of parts has been minimised and no special tools are required.
Semi air suspension systems enable the vehicle driving height to be maintained consistant. They greatly increase stability, in particular during high-speed motorway travel - in a straight-route, when buffeted by sturdy cross winds and whilst being overtaken by larger vehicles. At urban speeds Pneuride air kits some what reduce body roll on roundabouts and when cornering.
A rear end suspension fitted with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. The alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to restore the rear ride height of a motorhome to its correct level. Unlike vans, motorhomes are always greatly loaded. This is especially kosher if additional rear luggage racks are fitted to carry bikes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units completely corrects this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |