| |
The PneurideŽ range of semi air suspension systems are implemented by Dunlop Systems and Components. Air cushion and bellows have been designed, developed and manufactured by this company for more than half a century. Amidst this time almost than 10 million parts have been sent out to a variable wide range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the ability of a confident 'do it yourself' person. The required character of parts has been minimised and no special tools are required.
Semi air suspension systems enable the vehicle driving height to be maintained level. They greatly increase stability, in particular during high-speed motorway rides - in a straight-line, when buffeted by gutsy cross winds and whilst being over taken by heavy lorries. At slower speeds Air springs significantly reduce campervan roll on roundabouts and when cornering.
A rear suspension fitted with a semi air suspension kit can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to make good the rear driving height of a motorhome to its original on the flat. Unlike vans, motorhomes are always fully laden. This is basically true if additional rear bike racks are fitted to carry bikes etc. As a consiquence of of constant full loading, steel springs tend to sag after a while. Semi air suspension units completely counter this afliction.
|
link51
link52
link53
link54
link55
link56
link57
link58
link59
link60
link61
link62
link63
link64
link65
link66
link67
link68
link69
link70
link71
link72
link73
link74
link75
link76
link77
link78
link79
link80
link81
link82
link83
link84
link85
link86
link87
link88
link89
link90
link91
link92
link93
link94
link95
link96
link97
link98
link99
link100
Site Map |