| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. Throughout this time more than 10 million items have been sent out to a very wide range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the scope of a confident 'do it yourself' person. The total sum of parts has been minimised and no special tools are needed.
Semi air suspension systems enable the vehicle traveling height to be maintained level. They considerably increase stability, in particular during high-speed motorway travel - in a straight-line, when blown around by hearty sideways winds and whilst being overtaken by heavy vehicles. At lower speeds they accordingly reduce body roll on round abouts and when cornering.
A rear suspension retro-fitted stumble upon a semi air suspension system can be stiffened simply by increasing the air P.S.I. in the bellows. This rectifies any sagging of the rear suspension due to imbalanced or excessive loading.
Canny firm fit semi air suspension units to restore the rear end ride height of a motorhome to its original level. Unlike vans, motorhomes are usually fully laden. This is exceptionally true if additional rear racks are fitted to carry bikes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension kits compently counter this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |