| |
The Pneuride array of semi air suspension systems are manufactured by Dunlop Accessories and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. Amidst the time around than 10 million parts have been sold to a very wide range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the scope of a confident 'do it yourself' person. The total cardinal of parts has been minimised and no special tools are required.
Semi air suspension systems enable the vehicle ride height to be kept on the level. They greatly increase stability, in particular All this high-speed motorway travel - in a straight-route, while buffeted by strong cross winds and whilst being overtaken by larger vehicles. At lower speeds they significantly reduce body roll on roundabouts and when cornering.
A rear end suspension fitted recommend a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Many firm fit semi air suspension units to restore the rear end ride height of a motorhome to its manufacturers even. Unlike vans, motorhomes are eternally positively full. This is basically true if additional rear racks are fitted to carry bikes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units effectively counter this tendency.
|
link51
link52
link53
link54
link55
link56
link57
link58
link59
link60
link61
link62
link63
link64
link65
link66
link67
link68
link69
link70
link71
link72
link73
link74
link75
link76
link77
link78
link79
link80
link81
link82
link83
link84
link85
link86
link87
link88
link89
link90
link91
link92
link93
link94
link95
link96
link97
link98
link99
link100
Site Map |