| |
The PneurideŽ array of semi air suspension kits are created by Dunlop Systems and Components. Air spring and bellows have been designed, developed and fabricated by this company for more than half a century. During this time more than 10 million parts have been sold to a variable across-the-board range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the scope of a confident 'do it yourself' person. The total ordinal of parts has been minimised and no special tools are required.
Semi air suspension kits achieve the automitive ride height to be kept level. Pneuride air assit kits greatly increase stability, in particular during high-speed motorway travel - in a straight-line, when buffeted by strong sideway winds and whilst being overtaken by heavy vehicles. At lower speeds Pneuride air kits significantly degrade body roll on roundabouts and at the same time cornering.
A rear suspension fitted present a semi air suspension kit can be stiffened werely by adding the air pressure in the bellows. The supports any sagging of the rear suspension due to imbalanced or excessive loading.
Many firm fit semi air suspension units to restore the rear end ride height of a motorhome to its original level. Unlike vans, motorhomes are forevermore fully laden. This is enormously exact if accessory rear racks are fitted to hold bikes etc. As a result of habitual full loading, steel springs tend to sag after a while. Semi air suspension units effectively counter this afliction.
|
link51
link52
link53
link54
link55
link56
link57
link58
link59
link60
link61
link62
link63
link64
link65
link66
link67
link68
link69
link70
link71
link72
link73
link74
link75
link76
link77
link78
link79
link80
link81
link82
link83
link84
link85
link86
link87
link88
link89
link90
link91
link92
link93
link94
link95
link96
link97
link98
link99
link100
Site Map |