| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Systems and Components. Air spring and bellows have been designed, designed and fabricated by this company for more than half a century. Amidst this time about than 10 million parts have been dispersed on to a variable wide range of truck manufacturers.
The Pneuride semi air suspension kits have been designed in such a way that fitting should be well within the scope of a confident 'do it yourself' person. The quantity number of parts has been minimised and no special tools are required.
Semi air suspension systems lift the vehicle ride height to be kept level. They greatly increase stability, in particular Amidst high-speed motorway travel - in a straight-line, even when buffeted by strong cross winds and whilst being overtaken by heavy vehicles. At lower speeds they very much lower motorhome swaying on round abouts and when cornering.
A rear suspension equipped advance a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This supports any sagging of the rear suspension due to imbalanced or excessive loading.
Many people fit semi air suspension systems to restore the rear ride height of a motorhome to its original level. Dissimilarly vans, motorhomes are always fully laden. The is especially correct if additional rear racks are fitted to hold bikes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units entirely counter this afliction.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |