| |
The PneurideŽ range of semi air suspension systems are made by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. During this time more than 10 million parts have been sold to a very wide array of truck producers.
The Pneuride semi air suspension kits have been designed in such a way that fitting should be well within the scope of a experienced 'do it yourself' person. The total number of parts has been minimised and no special tools are required.
Semi air suspension systems enable the vehicle ride height to be kept constant. Pneuride air kits greatly increase stability, in particular during high-speed motorway travel - in a straight-line, even when buffeted by strong cross winds and whilst being overtaken by chunky vehicles. At light speeds they some what reduce truck roll on roundabouts and when turning.
A rear suspension fitted with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or extra loading.
Canny firm fit semi air suspension kits to restore the rear driving height of a motorhome to its original level. Unlike vans, motorhomes are always fully full. This is especially true if added rear racks are modified to carry bikes etc. As a result of constant full loading, steel cushion tend to sag after a while. Semi air suspension kits effectively counter this tendency.
|
link51
link52
link53
link54
link55
link56
link57
link58
link59
link60
link61
link62
link63
link64
link65
link66
link67
link68
link69
link70
link71
link72
link73
link74
link75
link76
link77
link78
link79
link80
link81
link82
link83
link84
link85
link86
link87
link88
link89
link90
link91
link92
link93
link94
link95
link96
link97
link98
link99
link100
Site Map |