| |
The Pneuride catalogue of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been constructed, developed and manufactured by this company for approximately than half a century. During this occasion more than 10 million parts have been sold to a very far and wide range of truck and bus manufacturers.
The PneurideŽ semi air suspension kits have been well put together in such a way that fitting should be well within the abilities of a confident 'do it yourself' person. The total number of parts has been minimised and no special tools are required.
Semi air suspension systems enable the vehicle ride height to be maintained on the flat. Air bellows greatly increase stability, in particular during high-momentum motorway rides - in a straight-line, when buffeted by strong cross winds and whilst being overtaken by heavy vehicles. At lower speeds Pneuride air assit significantly reduce camper roll on roundabouts and when manoeuvring.
A rear suspension aided with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This decreases any dropping of the rear suspension due to imbalanced or extreme loading.
Many people fit semi air suspension units to restore the rear driving height of a motorhome to its original consistant. Unlike vans, motorhomes are always fully laden. This is especially true if additional rear end luggage racks are fitted to carry tricycles etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units effectively off-set this aspect.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |