| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Systems and Components. Air spring and bellows have been designed, developed and manufactured by this company for more than half a century. During this time over than 10 million parts have been sold to a very wide catalogue of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting will be well attained within the scope of a confident 'do it yourself' person. The total number of parts has been minimised and no special gear are required.
Semi air suspension systems enable the vehicle ride height to be kept level. They eminently increase stability, in particular during high-speed motorway travel - in a straight-line, when buffeted by firm crossing winds and whilst being overtaken by heavy vehicles. At lower speeds they significantly reduce body roll on roundabouts and at the same time cornering.
A rear suspension fixed with a semi air suspension arrangement can be stiffened simply by increasing the air PSI in the bellows. This makes good any sagging of the rear suspension due to imbalanced or extravagant loading.
Lots of people fit semi air suspension units to make good the rear ride height of a motorhome to its original level. Unlike vans, motorhomes are always fully laden. This is enormously true if additional rear racks are fitted to carry bikes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units effectively counter this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |