| |
The PneurideŽ range of semi air suspension systems are set up by Dunlop Systems and Components. Air cushion and bellows have been designed, developed and fabricated by this company for more than halve a century. All the time more than 10 million parts have been sold to a very comprehensive range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way the fitting should be well within the capacity of a confident 'do it yourself' person. The comprehensive number of pieces has been minimised and no special apparatus are required.
Semi air suspension systems enable the vehicle ride height to be kept level. They greatly increase stability, in particular during high-velocity motorway rides - in a straight-line, when buffeted by strong cross winds and whilst being overtaken by huge vehicles. At lower speeds they some what reduce body roll on round abouts and while cornering.
A rear suspension fitted with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Bags of people fit semi air suspension units to improve the rear traveling height of a motorhome to its original on the level. Unlike vans, motorhomes are eternally entirely weighed down. This is especially true if spare back racks are fitted to support bikes etc. As a result of habitual full loading, steel springs tend to sag after a while. Semi air suspension units completely counter this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |