| |
The PneurideŽ range of semi air suspension systems are manufactured by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. During this time more than 10 million parts have been sold to a variable open assortment of vehicle specialists.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the scope of a confident 'do it yourself' man. The total character of pieces has been minimised and no special gear are required.
Semi air suspension accessories enable the auto ride height to be kept level. They eminently increase stability, in particular Throughout high-speed motorway travel - in a straight-line, when buffeted by forceful sideway winds and whilst being overtaken by heavy vehicles. At lower speeds they significantly reduce motor home lurch on roundabouts and when turning.
A rear end suspension fitted originate a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This alleviates any slouching of the back suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to restore the rear running height of a motorhome to its original level. Unlike vans, motorhomes are always fully laden. This is especially true if additional rear racks are fitted to carry wheelss etc. As a result of endless full loading, steel springs tend to sag after a while. Semi air suspension kits entirely offset this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |