| |
The PneurideŽ catalogue of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. During this time much more than 10 million parts have been sent out to a very wide range of automobile manufacturers.
The PneurideŽ semi air suspension kits have been well put together in such a way any fitting should hopefully be well in the range of a self confident 'do it yourself' indevidual. The total number of pieces has been minimised and no special apparatus are required.
Semi air suspension systems enable the vehicle ride height to be maintained level. They greatly boost stability, in particular during high-speed motorway travel - in a straight-line, while buffeted by strong cross winds and whilst being overtaken by heavy artics. At lower speeds Pneuride air assistance significantly lessen body roll on roundabouts and when cornering.
A rear suspension fitted recommend a semi air suspension system can be stiffened simply by increasing the air P.S.I. in the bellows. This alleviates any sagging of the back end suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to pick up the rear ride height of a motorhome to its original design constant. Unlike vans, motorhomes are always greatly laden. This is generally true if additional rear racks are retro-fitted to support bikes etc. As a consiquence of of persistent full loading, steel springs tend to sag after a while. Semi air suspension systems effectively counter this tendency.
|
link51
link52
link53
link54
link55
link56
link57
link58
link59
link60
link61
link62
link63
link64
link65
link66
link67
link68
link69
link70
link71
link72
link73
link74
link75
link76
link77
link78
link79
link80
link81
link82
link83
link84
link85
link86
link87
link88
link89
link90
link91
link92
link93
link94
link95
link96
link97
link98
link99
link100
Site Map |