| |
The PneurideŽ range of semi air suspension systems are engineered by Dunlop Kits and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. During this era more than 10 million parts have been sold to a very wide catalogue of vehicle establishments.
The PneurideŽ semi air suspension kits have been designed in such a way the fitting should be well within the scope of a confident 'do it yourself' person. The total number of pieces has been minimised and no special tools are required.
Semi air suspension systems enable the truck ride height to be kept level. They greatly increase stability, in particular during high-momentum motorway travel - in a straight-line, when buffeted by hi cross winds and whilst being overtaken by huge vehicles. At lower speeds they significantly reduce camper van leaning on roundabouts and when cornering.
A rear suspension fitted with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the back end suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to restore the rear ride height of a motorhome to its original level. Unlike vans, motorhomes are always abuntantly laden. This is considerably indisputable if additional rear end racks are fitted to carry bikes etc. As a consiquence of constant full loading, steel springs tend to sag after a while. Semi air suspension units advantageously resist this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |