| |
The PneurideŽ assortment of semi air suspension accessories are made by Dunlop Systems and Components. Air springs and bellows have been designed, created and manufactured by this company for more than half a century. During this time approximately than 10 million components have been sold to a very broad range of automobile manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the scope of a confident 'do it yourself' person. The quantity number of parts has been minimised and no special tools are required.
Semi air suspension systems facilitate the transport ride height to be set level. They greatly build-up stability, in particular during high-speed motorway travel - in a straight-line, when buffeted by vigerious sideways winds and whilst being over taken by heavy vehicles. At lower speeds they significantly reduce body swaying on roundabouts and when cornering.
A rear suspension retro fitted submit a semi air suspension arrangement can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to restore the rear running height of a motorhome to its original level. Unlike vans, motorhomes are always fully laden. This is especially true if additional back racks are fitted to carry bikes etc. As a consiquence of constant full loading, steel springs usually to sag after a while. Semi air suspension units effectively counter this aspect.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |