| |
The PneurideŽ class of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. For this time more than 10 million parts have been dispersed on to a very wide range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way the fitting should be well within the scope of a confident 'do it yourself' man. The total emblem of parts has been minimised and no special tools are required.
Semi air suspension systems enable the transport ride height to be kept constant. They decidedly increase stability, in particular during high-momentum motorway driving - in a straight-line, even when buffeted by strong crossing winds and whilst being overtaken by heavy freight. At lower speeds they significantly reduce body swaying on roundabouts and when cornering.
A rear suspension fitted with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This lessens any sagging of the rear end suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to improve the rear end driving height of a motorhome to its original even. Unlike vans, motorhomes are always fully laden. This is especially true if additional rear racks are rigged to carry bikes etc. As a result of habitual full loading, steel springs tend to sag after a while. Semi air suspension units entirely counter this tendency.
|
link51
link52
link53
link54
link55
link56
link57
link58
link59
link60
link61
link62
link63
link64
link65
link66
link67
link68
link69
link70
link71
link72
link73
link74
link75
link76
link77
link78
link79
link80
link81
link82
link83
link84
link85
link86
link87
link88
link89
link90
link91
link92
link93
link94
link95
link96
link97
link98
link99
link100
Site Map |