| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for about than half a century. Amid this era more than 10 million parts have been sold to a very wide range of truck manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well in side the scope of a confident 'do it yourself' man. The total number of parts has been minimised and no special tools are required.
Semi air suspension systems enable the vehicle running height to be kept level. Pneuride air assit greatly increase stability, in particular during high-speed motorway travel - in a straight-route, when buffered by strong cross winds and whilst being overtaken by heavy lorries. At reduced speeds Pneuride air assitance kits significantly lessen van roll on round abouts and when manoeuvring.
A rear suspension fitted with a semi air suspension system can be bolstered up simply by increasing the air P.S.I. in the bellows. The alleviates any sinking of the back suspension due to imbalanced or excessive loading.
Many people fit semi air suspension units to restore the rear ride height of a motorhome to its original level. Unlike vans, motorhomes are forever fully weighed down. This is especially exact if additional back racks are retrofitted to carry bikes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units effectively counter this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |