| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. During this time moreover than 10 million parts have been sold to a very wide range of auto manufacturers.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the domain of a confident 'do it yourself' person. The entire denominator of parts has been minimised and no special gear are required.
Semi air suspension systems empower the lorry and bus ride height to be kept level. They greatly stablise stability, in particular All high-velocity motorway rides - in a straight-line, when buffeted by sturdy cross winds and whilst being overtaken by long vehicles. At lower speeds they significantly reduce body roll on roundabouts and while turning.
A rear suspension rigged provide a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. The alleviates any droopyness of the rear end suspension due to imbalanced or excessive loading.
Scores of people fit semi air suspension units to restore the rear ride height of a motorhome to its original constant. Unlike vans, motorhomes are always fully laden. This is mostly true if additional rear racks are equipped to carry bikes etc. As a result of constant full loading, steel suspension system tend to sag after a while. Semi air suspension systems entirely off-set this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |