| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Kits and Components. Air spring and bellows have been constructed, developed and manufactured by the company for exceeding than half a century. During the time more than 10 million parts have been sold to a variable wide array of transport fabricators.
The PneurideŽ semi air suspension kits have been designed in such a way that fitting should be well within the capability of a confident 'do it yourself' guy. The total number of parts has been minimised and no special apparatus are required.
Semi air suspension systems enable the vehicle ride height to be kept consistant. Pneuride air assistance kits greatly build up stability, in particular during hi-speed motorway travel - in a straight-line, when buffeted by strong sideway winds and whilst being overtaken by heavy vehicles. At reduced speeds they significantly diminish body roll on corners and when cornering.
A back end suspension retrofitted with a semi air suspension system can be stiffened simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or exaggerated loading.
Many people fit semi air suspension units to restore the rear ride height of a motorhome to its original design on the flat. Unlike vans, motorhomes are always fully burdened. This is especially true if additional rear racks are fitted to support bikes etc. As a consiquence of perminant all-inclusive loading, steel springs tend to sag after a while. Semi air suspension kits effectively counter this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |