| |
The PneurideŽ range of semi air suspension systems are supplied by Dunlop Systems and Components. Air springs and bellows have been designed, developed and manufactured by this company for more than half a century. During this occasion more than 10 million parts have been sent out to a variable far-ranging range of vehicle manufacturers.
The PneurideŽ semi air suspension kits have been constructed in such a way that fitting should be well within the scope of a confident 'do it yourself' person. The comprehensive number of parts has been minimised and no special tools are required.
Semi air suspension systems achieve the vehicle ride height to be kept level. Pneuride air assistance kits vastly stablise stability, in particular during high-speed motorway travel - in a straight-route, when buffeted by strong cross winds and whilst being overtaken by heavy lorries. At lower speeds they significantly reduce body leaning on roundabouts and when cornering.
A back end suspension fitted come up with a semi air suspension system can be beefed-up simply by increasing the air pressure in the bellows. This alleviates any sagging of the rear suspension due to imbalanced or excessive loading.
Scores of people fit semi air suspension units to bring back the rear ride height of a motorhome to its original designed constant. Unlike vans, motorhomes are commonly fully full. This is largely true if additional rear bike racks are fitted to carry velocipedes etc. As a result of constant full loading, steel springs tend to sag after a while. Semi air suspension units effectively corrects this tendency.
|
link1
link2
link3
link4
link5
link6
link7
link8
link9
link10
link11
link12
link13
link14
link15
link16
link17
link18
link19
link20
link21
link22
link23
link24
link25
link26
link27
link28
link29
link30
link31
link32
link33
link34
link35
link36
link37
link38
link39
link40
link41
link42
link43
link44
link45
link46
link47
link48
link49
link50
Site Map |