Manual Jacking Legs/Steadies Max 55cm
Simple installation either through two mounting bolts on the top of the leg fixing bracket or via welding a bracket to the chassis / outrigger.
The leg is held in a horizontal stowed position. To release, pull leg from locating notch and allow inner telescopic leg to extend by placing toe on release flange.
Lock in place using tommy bar supplied.
To release, apply pressure with toe on flange then raise back to stowed position.
Sold as pairs.
Mounting bracket 10cm x 5cm, Long – Length stowed 52cm – extends to 59cm
Please note, these are not robust enough to lift the vehicle clear of the ground, they're designed as steadies, not Jacks