Manual Legs/Steadies 30/47cm

Manual Legs/Steadies 30/47cm

Simple installation either through two mounting bolts on the top of the leg fixing bracket or via welding a bracket to the chassis/outrigger. The leg is held in a horizontal stowed position. To release, pull leg from locating notch and allow inner telescopic leg to extend by placing toe on release flange. Lock in place using tommy bar supplied. To release, apply pressure with toe on flange, then raise back to stowed position.

Silver coated steel, sometimes painted black (depending on what our supplier sends.

Supplied as a pair

Minimum length 30CM approx
Maximum length 47CM approx

Please Note: These legs are intended to be used as steadies not jacks, they are not designed for jacking the vehicle clear of the ground which is a common mistake!