NRF Blinds & Flyscreens
Very well priced combination blinds and fly-screens in Grey.
With these blinds the user has the ability to completely black out the vehicle or to just partially allow light in, all the time being totally protected against insects.
The blinds are fitted as standard by many European motorhome manufacturers.
These NRF blinds are supplied in a pack and you assemble these yourself on
site.
Contents of the delivered package (top and bottom cassettes, 2 side rails and 4
end caps to cover screw fixings).
Please be assured they look far better in the flesh as our photos do not show
them very well at all
Fully closed (Blind down)
Partly closed with fly screen meeting blind
Fly screen fully open
For those with good DIY skills, it is possible to make changes to these
blinds to suit your own application, so we have included below further
information to aid any thoughts on making changes to these cassette blinds.
BEFORE making any cuts or adjustments, the measurements here are ONLY
intended as a guide, its up to the installer to take their own measurements
before cutting etc.
First of all, its NOT possible to change the width of these blinds!
The image below shows how the top and bottom sections slot in to the side
rails.
The image below shows a top/bottom section fully engaged with the side guide
rail and the finishing cap over the fixing screws.
The top and bottom sections need a minimum of 43mm vertical flat space to fit
the top and bottom sections in place.
If necessary, the lip on the side could be removed with a suitable tool to gain
an extra 7mm approx.
The image below shows the side guide rails
Dimension H below is the clear space between the top and bottom sections, so
any edges of the window frame needs to fit within the space of H
The length of H can be cut down to suit your needs. Standard length = 650mm
 |
